10 Cue Sequencer / Stepper

This 10 Cue Firework Sequencer / Stepper can be triggered by any other Firing System that produces more than a 6 volt output.

Note that the CH1-R 1 Cue Receivers are not suitable for use with this product.

Ideal for expanding an existing firing system to allow automatic sequences.

Connect as many 10 Cue Sequencers together as you want.

Specification

• Battery or External Power Supply
  2 x PP3 9v internal battery or 12 - 24v  external battery.
• Trigger Input
  6 - 30v pulse from any source will start the sequencer.
• Expandable
  Connect many sequencers together using simple 2 core wire.
• No Relays
  Solid State MOSFETs used to fire each Cue.
• High Output Power
  12 - 24v output on each Cue.
• All Fire Mode
  Fire all 10 Cues when triggered.
• "Same Time" Fire Mode
  Fire all 10 Cues with the same time delay between each cue (0.00 - 9.99s)
• "Different Time" Fire Mode
  Fire all 10 Cues with a different time delay between each cue (0.00 - 9.99s).
• Test
  Continuity check on each Cue and the Output Terminals.

Included

• 1 x 10 Cue Sequencer.

Information

 Watch the video

 Instructions v1