10 Cue Sequencer / Stepper

Click to enlarge

This 10 Cue Firework Sequencer / Stepper can be triggered by any other Firing System that produces more than a 6 volt output.

Note that the CH1-R 1 Cue Receivers are not suitable for use with this product.

Ideal for expanding an existing firing system to allow automatic sequences.

Ideal as a sequencer / stepper for special effect, SFX or pyrotechnics.

Connect as many 10 Cue Sequencers together as you want.

Specification

Battery or External Power Supply
2 x PP3 9v internal battery or 12 - 24v external battery.
Trigger Input
6 - 30v pulse from any source will start the sequencer.
Expandable
Connect many sequencers together using simple 2 core wire.
No Relays
Solid State MOSFETs used to fire each Cue.
High Output Power
12 - 24v output on each Cue.
All Fire Mode
Fire all 10 Cues when triggered.
"Same Time" Fire Mode
Fire all 10 Cues with the same time delay between each cue (0.00 - 9.99s)
"Different Time" Fire Mode
Fire all 10 Cues with a different time delay between each cue (0.00 - 9.99s).
Test
Continuity check on each Cue and the Output Terminals.